Administrator Guide

Parameters
remark-number (Optional) Enter the remark number. The range is from 0 to 65535 for MAC ACL
and 0 to 4294967290 for IP ACL.
NOTE: You can use the same sequence number for the remark and an ACL
rule.
description Enter a description of up to 80 characters.
Defaults Not configured.
Command Modes
● CONFIGURATION-STANDARD-ACCESS-LIST
● CONFIGURATION-EXTENDED-ACCESS-LIST
● CONFIGURATION-MAC ACCESS LIST-STANDARD
● CONFIGURATION-MAC ACCESS LIST-EXTENDED
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14.0.0 Made the remark number as an optional value.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.4.1.0 Introduced on the E-Series.
Usage
Information
The remark command is available in each ACL mode. You can configure up to 4294967291 remarks for a
given IP ACL and 65536 remarks for a given MAC ACL.
You can include a remark with or without a remark number. If you do not enter a remark number, the
remark inherits the sequence number of the last ACL rule. If there is no ACL rule when you enter a
remark, the remark takes sequence number 5. If you configure two remarks with the same sequence
number and different strings, the second one replaces the first string. You cannot configure two or more
remarks with the same string and different sequence numbers.
To remove a remark, use the no remark command with or without the sequence number. If there is a
matching string, the system deletes the remark.
Example
The following example shows the use of the remark command twice within CONFIGURATION-
STANDARD-ACCESS-LIST mode. The remark precedes the rule in the running configuration because it is
Access Control Lists (ACL) 217