Administrator Guide

Field Description
Leaves The number of Multicast leaves that have been sent.
MLDv1 queries The number of MLDv1 queries that have been received.
MLDv2 queries The number of MLDv2 queries that have been received.
Malformed
Packets
The number of MLDv1 and MLDv2 packets that do not match the requirement for a
valid MLD packet.
Example
MLD Host Traffic Counters
Elapsed time since counters cleared: 0028:33:52
Received Sent
Valid MLD Packets 97962 18036
Reports 79962 18034
Leaves ---- 0
MLDv2 Queries 18000 ----
MLDv1 Queries 0 ----
Errors:
Malformed Packets: 4510
show ipv6 neighbors
Display information about the IPv6 neighbors discovered on the switch CPUs.
C9000 Series
Syntax
show ipv6 neighbors [cpu rp] [ipv6–address] {ipv6–address}] [interface
interface [vrf vrf-name]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to display
the neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors corresponding to the
default VRF are displayed.
cpu rp Enter the keywords cpu rp to display information about IPv6 neighbors learned
only on the Route Processor.
ipv6–address Enter the IPv6 address of a neighbor to display information about the specified
device.
ipv6-address Enter the IPv6 address of the neighbor in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of zero.
interface
interface
Enter the keyword interface then the interface type and slot/port or number
information:
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
IPv6 Basics 993