CLI Guide

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Example
DellEMC# show ip vrf
VRF-Name VRF-ID Interfaces
fault 0 Te 0/0-13,18-47,
Fo 0/48,52,56,60,
Ma 0/0,
Ma 1/0,
Ma 2/0,
Ma 3/0,
Ma 4/0,
Ma 5/0,
Ma 6/0,
Ma 7/0,
Ma 8/0,
Ma 9/0,
Ma 10/0,
Ma 11/0,
Nu 0,
Vl 1
test1 1 Te 0/14,16-17
test2 2 Te 0/15
management 64
DellEMC# show ip vrf test1
VRF-Name VRF-ID Interfaces
test1 1 Te 0/14,16-17
show run vrf
Displays configuration information corresponding to all the VRFs in the system.
Syntax
show run vrf vrf-name
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
Virtual Routing and Forwarding (VRF) 1619