CLI Guide

When a channel member is added to a port-channel and there is not enough ACL CAM space, the
MAC limit functionality on that port-channel is undefined. When this occurs, un-configure the existing
configuration first and then reapply the limit with a lower value.
Related
Commands
● mac learning-limit mac-address-sticky — replace deprecated no-station-move parameter.
● show mac learning-limit — display MAC learning-limit configuration.
mac learning-limit learn-limit-violation
Configure an action for a MAC address learning-limit violation.
S6000
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-violation {log |
shutdown} command.
Parameters
log Enter the keyword log to generate a syslog message on a learning-limit violation.
shutdown Enter the keyword shutdown to shut down the port on a learning-limit violation.
Defaults None
Command Modes INTERFACE (conf-if-interface-slot/port)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.8.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage
Information
This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
● show mac learning-limit — display details of the mac learning-limit.
890 Layer 2