Glossary

ManualsBrandsDell ManualsAccess PlatformsOS9

1301

Table Of Contents

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.

Usage

Information

If the specified color-map does not exist, the Diffserv Manager (DSM) creates a color map and sets all

the DSCP values to green (low drop precedence).

The default setting for each DSCP value (0-63) is green (low drop precedence). This command allows

setting the number of specific DSCP values to yellow or red.

Important Points to Remember

● All DSCP values that are not specified as yellow or red are colored green.

● A DSCP value cannot be in both the yellow and red lists. Setting the red or yellow list with any DSCP

value that is already in the other list results in an error and no update to that list is made.

● Each color map can only have one list of DSCP values for each color; any DSCP values previously

listed for that color that are not in the new DSCP list are colored green.

Example

DellEMC(conf-dscp-color-map)# dscp yellow 9,10,11,13,15,16

Commands

● qos dscp-color-map — configures the DSCP color map.

● qos dscp-color-policy— configures a DSCP color policy.

qos dscp-color-map

Configure the DSCP color map.

Syntax

qos dscp-color-map map-name

To remove a color map, use the no qos dscp-color-map map-name command.

Parameters

map-name

Enter the name of the DSCP color map. The map name can have a maximum of 32

characters.

Defaults None

Command Modes CONFIGURATION