Glossary

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL.
Example
DellEMC# show userroles
Role Inheritance Modes
netoperator Exec
netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
secadmin Exec Config
sysadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
netoperator
testadmin netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
Related
Commands
● userrole — create user roles.
userrole
Create user roles for the role-based security model.
Syntax
userrole name inherit existing-role-name
To delete a role name, use the no userrole name command. Note that the reserved role names may not be
deleted.
Parameters
name Enter a text string for the name of the user up to 63 characters. It cannot be one
of the system defined roles (sysadmin, secadmin, netadmin, netoperator).
inherit existing-
role-name
Enter the inherit keyword then specify the system defined role to inherit
permissions from (sysadmin, secadmin, netadmin, netoperator).
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
1462 Security