Release Notes
Table Of Contents
- Dell EMC System S4048T–ON 9.14(2.10) Release Notes
- Document Revision History
- Supported Hardware
- Supported Software
- New Dell EMC Networking OS Version 9.14(2.10) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the sub-components
- Upgrading the ONIE Package for the S4048T-ON System
- Upgrading the DIAG Package for the S4048T-ON System
- Installing Dell EMC Networking OS on the S4048T-ON using ONIE
- Support Resources
6. Reload the unit.
EXEC Privilege Mode
reload
DellEMC#reload
7. Verify the S4048T-ON has been upgraded to the Dell EMC Networking OS version 9.14(2.10).
EXEC Privilege Mode
show version
DellEMC#show version
Dell EMC Real Time Operating System Software
Dell EMC Operating System Version: 2.0
Dell EMC Application Software Version: 9.14(2.10)
Copyright (c) 1999-2021 by Dell Inc. All Rights Reserved.
Build Time: Tue May 18 21:22:46 2021
Build Path: /build/build02/SW/SRC
Dell EMC Networking OS uptime is 1 hour(s), 34 minute(s)
System image file is "system://A"
System Type: S4048T-ON
Control Processor: Intel Rangeley with 3 Gbytes (3181805568 bytes) of memory, core(s)
2.
8G bytes of boot flash memory.
1 48x10G, 6x40G TE/FO G (S4048T-ON)
48 Ten GigabitEthernet/IEEE 802.3 interface(s)
6 Forty GigabitEthernet/IEEE 802.3 interface(s)
Uninstalling Dell EMC Networking OS from the S4048T-ON
To uninstall Dell EMC Networking OS version 9.14(2.10) from the S4048T-ON device, perform the following steps:
1. Reboot the system. During the reboot process, the system displays the following message prompting you to press the Esc
key in order to stop the auto-boot process:
Version 2.17.1245. Copyright (C) 2021 American Megatrends, Inc.
BIOS Date: 05/18/2021 16:23:50 Ver: 0ACBZ028
Press DEL or F2 to enter setup.
GRUB loading.
Welcome to GRUB!
Grub 2.02~beta2 (Dell EMC)
Built by root at ubuntu on Tue_May_18_13:04:17_UTC_2021
S4000 Boot Flash Label 3.27.2.10 NetBoot Label 3.27.2.10
Press Esc to stop autoboot ... 0
2. At this prompt message, press the Esc key. The following menu appears:
+-------------------------------------------------------------------------+
| Dell EMC Networking OS
| Dell EMC-Boot Line Interface
| DELL-DIAG
| ONIE
+-------------------------------------------------------------------------+
20