Setup Guide

● For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Command Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Modified to include the keyword default.
pre- 6.1.1.1 Introduced on the E-Series.
Usage
Information
Although the passive interface does not send or receive routing updates, the network on that interface is
still included in OSPF updates sent using other interfaces.
The default keyword sets all interfaces as passive. You can then configure individual interfaces, where
adjacencies are desired, using the no passive-interface interface command. The no form
of this command is inserted into the configuration for individual interfaces when the no passive-
interface interface command is issued while passive-interface default is configured.
This command behavior has changed as follows:
passive-interface interface
● The previous no passive-interface interface is removed from the running configuration.
● The ABR status for the router is updated.
● Save passive-interface interface into the running configuration.
passive-interface default
● All present and future OSPF interfaces are marked as passive.
● Any adjacency is explicitly terminated from all OSPF interfaces.
● All previous passive-interface interface commands are removed from the running
configuration.
● All previous no passive-interface interface commands are removed from the running
configuration.
no passive-interface interface
● Remove the interface from the passive list.
● The ABR status for the router is updated.
1070
Open Shortest Path First (OSPFv2 and OSPFv3)