Setup Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1131

Table Of Contents

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.1.(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.

8.3.19.0 Introduced on the S4820T.

7.8.1.0 Added support for the C-Series.

7.4.1.0 Introduced on the E-Series.

Usage

Information

To redistribute the default route (x:x:x:x::x), use the default-information originate command.

router-id

Designate a fixed router ID.

Syntax

router-id ip-address

To return to the previous router ID, use the no router-id ip-address command.

Parameters

ip-address

Enter the router ID in the dotted decimal format.

Defaults The router ID is selected automatically from the set of IPv4 addresses configured on a router.

Command Modes

ROUTER OSPF for OSPFv2

ROUTER OSPFv3 for OSPFv3

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.12(1.0) Introduced on the S5048F–ON.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.