Setup Guide

If this command is used on an OSPFv3 process that is already active (has neighbors), all the neighbor
adjacencies are brought down immediately and new sessions are initiated with the new router ID.
snmp context
Configure SNMPv3 context name to map multiple OSPFv3 VRF instances.
Syntax
snmp context {context-name}
To clear snmp context, use the no snmp context {context-name} command.
Parameters
context-name Enter the SNMP context name. The maximum length is 32 alphanumeric
characters.
Defaults None.
Command Modes IPv6 ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(1.0) Introduced on the S3100 series, S3048–ON, S4048–ON, S4048T-ON, S5048F-ON,
S6000, S6010–ON, S6100–ON, Z9100–ON, Z9500, S6000–ON, C9010, MXL, and
FN IOM.
Usage
Information
Use SNMPv3 context configuration to distinguish between various OSPFv3 VRF instances.
Example
DellEMC(conf-ipv6-router_ospf)#snmp context ospf1
DellEMC>show runnig-config ospf
!
ipv6 router ospf 10
router-id 10.10.10.1
snmp context ospf1
!
DellEMC>
show crypto ipsec policy
Display the configuration of IPsec authentication and encryption policies.
Syntax
show crypto ipsec policy [name name]
Parameters
name name (OPTIONAL) Displays configuration details about a specified policy.
Defaults No default behavior or values.
Command Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Open Shortest Path First (OSPFv2 and OSPFv3) 1137