Setup Guide

Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
ip ssh connection-rate-interval
Configure the rate interval in which the maximum number of SSH connections can be attempted.
Syntax
ip ssh connection-rate-interval 1-5
Parameters
1-5 Enter the rate interval in which the maximum number of SSH connections can be
attempted. The range is from 1 to 5 minutes.
Defaults 1 minute
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced on the S6000–ON, S6100–ON and Z9100–ON.
ip ssh connection-rate-lockout
Configure a lockout period until which the SSH connections are blocked, after the SSH connection attempts reach the rate limit.
Syntax
ip ssh connection-rate-lockout 0—300
Parameters
0-300 Enter a lockout period in seconds. The range is from 0 to 300 seconds.
Defaults 0
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced on the S6000–ON, S6100–ON and Z9100–ON.
1406 Security