Setup Guide

Z9100-ON MSS FPGA : 2.1
Z9100-ON MSS IAP : 2.1
Z9100-ON OOB-FPGA : 1.0
------------------------------------ show clock
-------------------------------
04:43:44.047 UTC Mon Jul 2 2018
<output truncated for brevity>
Example(show
tech-support
stack-unit)
DellEMC#show tech-support stack-unit 1
------------ show version -------------
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: 9-8(1-270)
Copyright (c) 1999-2015 by Dell Inc. All Rights Reserved.
Build Time: Sun Sep 20 04:00:00 2015
Build Path: /build/build09/SW/SRC
Dell EMC Networking OS uptime is 40 minute(s)
System image file is "system://B"
System Type: Z9100-ON
Control Processor: Intel Rangeley with 3 Gbytes (3203289088 bytes) of
memory, core(s) 4.
16G bytes of boot flash memory.
1 34-port TE/TF/FO/FI/HU G (Z9100-ON)
54 Ten GigabitEthernet/IEEE 802.3 interface(s)
1 Forty GigabitEthernet/IEEE 802.3 interface(s)
8 Fifty GigabitEthernet/IEEE 802.3 interface(s)
14 Hundred GigabitEthernet/IEEE 802.3 interface(s)
------------ show clock -------------
21:44:30.965 UTC Sat Sep 19 2015
------------ show running-config -------------
Current Configuration ...
! Version 9-8(1-270)
! Last configuration change at Sat Sep 19 21:08:22 2015 by default
!
boot system stack-unit 1 primary system: B:
boot system stack-unit 1 secondary system: B:
boot system stack-unit 1 default system: A:
!
redundancy auto-synchronize full
!
hardware watchdog stack-unit 1
!
hostname Dell
!
stack-unit 1 provision Z9100-ON
<Output truncated for brevity>
ssh-peer-stack-unit
Open an SSH connection to the peer stack-unit.
Syntax
ssh-peer-stack-unit [-l username]
148 Control and Monitoring