Setup Guide

Parameters
-l username (OPTIONAL) Enter the keyword -l then your user name. The default is the user
name associated with the terminal.
Defaults Not configured.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.11.1 Introduced on the S-Series.
stack-unit location-led
Toggle the stack unit location LED on or off.
Syntax
stack-unit stack-unit-number location—led { off | on}
Parameters
stack-unit stack-
unit-number
Enter the keywords stack-unit and the stack unit number.
on | off Turn the stack unit location LED on or off.
Default
None
Command Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S6100–ON and S5000.
9.8(1.0) Introduced on the Z9100–ON.
Example
DellEMC#stack-unit 1 location-led on
Control and Monitoring 149