Setup Guide

vxlan-vnid
Associate VNID to VLAN.
Syntax
vxlan-vnid VNID
To remove the association, use the no vxlan-vnid command.
Parameters
VNID Enter the logical network identifier.
Defaults None
Command Modes INTERFACE VLAN
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048, S4048T, S6000, S6010, S6100, and Z9100.
Usage
Information
Use this command to associate a VNID to specific VLAN. Each VLAN is mapped to a single VNID.
show running-config vxlan
Displays the VXLAN configuration information from running configuration.
Syntax
show running-config vxlan
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–
ON, S6100–ON, and Z9100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S6000.
Example
Static Mode:
DellEMC#show running-config vxlan
!
feature vxlan
!
vxlan-instance 1 static
local-vtep-ip 1.1.1.1
no shutdown
vni-profile ni1
vnid 1
1672 Virtual Extensible LAN (VXLAN)