Setup Guide

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage
Information
The following describes the show vrrp brief command.
Item Description
Interface Lists the interface type, slot, and port of the configured VRRP group.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface. If you configured the track
command to track that interface and you disable the interface, the cost is
subtracted from the priority value assigned to the interface.
Pre States whether preempt is enabled on the interface:
● Y = Preempt is enabled.
● N = Preempt is not enabled.
State Displays the operational state of the interface using one of the following:
● NA/IF (the interface is not available).
● MASTER (the interface associated with the MASTER router).
● BACKUP (the interface associated with the BACKUP router).
Master addr Displays the IP address of the MASTER router.
Virtual addr(s) Displays the virtual IP addresses of the VRRP routers associated with the interface.
Example (Brief)
DellEMC> Interface Grp Pri Pre State Master addr Virtual addr(s)
Description--------------------------------------------------
Te 1/3/1 1 100 Y Master 200.200.200.200 200.200.200.201
Te 1/3/1 2 100 Y Master 200.200.200.200 200.200.200.202 200.200.200.203
Description
Te 1/3/1 3 100 Y Master 1.1.1.1 1.1.1.2
Te 1/3/1 4 100 Y Master 200.200.200.200 200.200.200.206 200.200.200.207
... short desc
Te 1/3/1 254 254 Y Master 200.200.200.200 200.200.200.204 200.200.200.205
DellEMC>
Usage
Information
The following describes the show vrrp command.
Item Description
TenGigabitEther
net 1/3...
Displays the interface, VRRP group ID, and network address. If the interface is not
sending VRRP packets, 0.0.0.0 appears as the network address.
State: master... Displays the interface’s state:
● Na/If (not available)
● master (MASTER virtual router)
● backup (BACKUP virtual router)
Also displays the interface’s priority and IP address of the MASTER.
Hold Down:... Displays additional VRRP configuration information:
● Hold Down displays the hold down timer interval in seconds.
● Preempt displays TRUE if preempt is configured and FALSE if preempt is not
configured.
● AdvInt displays the Advertise Interval in seconds.
Adv rcvd:... Displays counters for the following:
● Adv rcvd displays the number of VRRP advertisements received on the
interface.
1690 Virtual Router Redundancy Protocol (VRRP)