Setup Guide

Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
clear fip-snooping statistics
Clears the statistics on the FIP packets snooped on all VLANs, a specified VLAN, or a specified port interface.
Syntax
clear fip-snooping statistics [interface vlan vlan-id | interface port-type
slot/port[/subport] | interface port-channel port-channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics to be cleared.
port-type slot/
port
Enter the slot number and port-type of the FIP packet statistics to be cleared.
port-
channelnumber
Enter the port channel number of the FIP packet statistics to be cleared.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
debug fip snooping
Enable debugging on FIP snooping.
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | ns | rscn | rx |
tx]
Parameters
all Enter the keyword all to enable debugging on all the options.
acl Enter the keyword acl for ACL-specific debugging.
error Enter the keyword error for error-specific debugging.
ifm Enter the keyword ifm for IFM-specific debugging.
info Enter the keyword info for information-specific debugging.
FIP Snooping 581