Setup Guide

show os-version
Display the release and software image version information of the image file specified.
Syntax
show os-version [file-url]
Parameters
file-url (OPTIONAL) Enter the following location keywords and information:
● For a file on the internal flash, enter flash:// followed by the filename.
● For a file on an FTP server, enter ftp://user:password@hostip/
filepath.
● For a file on a TFTP server, enter tftp://hostip/filepath.
● For a file on the USB port, enter usbflash://filepath.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
DellEMC#show os-version
RELEASE IMAGE INFORMATION :
------------------------------------------------------------
Platform Version Size ReleaseTime
Z-Series:Z9100-ON 9.8(1.0) 54246311 Sep 12 2015 04:21:53
TARGET IMAGE INFORMATION :
-------------------------------------------------
Type Version Target checksum
runtime 9-8(1-257) Control Processor passed
BOOT IMAGE INFORMATION :
--------------------------------------------------
Type Version Target checksum
boot flash 3.23.2.0 Control Processor passed
70 File Management