Setup Guide

○ feature udf-acl
○ feature aclrange
○ feature ipv6acloptimized
○ feature acloptimized
Example
DellEMC# upgrade system tftp://10.11.8.12/dv-rainier-13 a:
00:39:32 : Discarded 1 pkts. Expected block num : 51.
Received block num: 50
!00:39:36 : Discarded 1 pkts. Expected block num : 65.
Received block num: 64
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.......
...........!!!!!!!!!!!!!!!!!!!!!!!
93924044 bytes successfully copied
System image upgrade completed successfully.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Image upgraded to all
DellEMC#
The following example shows that the system prompts for the hash value of the OS image with the OS
image verification feature enabled:
Dell# upgrade system tftp://10.16.127.35/FTOS-SE-9.11.0.1 A:
Hash Value: e42e2548783c2d5db239ea2fa9de4232
!!!!!!!!!!!!!!...
upgrade boot
Upgrade the bootflash image or bootselector image.
Syntax
upgrade boot {all | bootflash—image | bootselector-image}stack-unit {stack—
unit—id | all}{booted | flash: | ftp: | scp: | tftp: | usbflash:}
Parameters
all Enter the keyword all to change both the bootflash and bootselector images.
bootflash-image Enter the keyword bootflash-image to change the bootflash image..
bootselector-
image
Enter the keyword bootselector-image to upgrade the BIOS system image.
stack-unit-id Enter the stack–unit–id to upgrade only the mentioned stack-unit .
all Enter the keywords all to upgrade the member stack-units.
booted Enter the keyword booted to upgrade from the current image on the device.
ftp: Enter the keyword ftp to follow it with the location of the source file in this
form: //userid:password@hostip/filepath, or press Enter to launch a prompt
sequence.
tftp: Enter the keyword tftp to follow it with the location of the source file in this
form: //hostlocation/filepath, or press Enter to launch a prompt sequence.
flash: Enter the keyword flash to follow it with the location of the source file in this
form: //filepath, or press Enter to launch a prompt sequence.
usbflash: Enter the keyword flash to follow it with the location of the source file in this
form: //filepath, or press Enter to launch a prompt sequence.
A: Enter the keyword A to upgrade the bootflash partition A:.
B: Enter the keyword B to upgrade the bootflash partition B:.
Defaults none
File Management 79