Setup Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

821

822

823

824

825

826

827

828

829

830

Table Of Contents

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

7.5.1.0 Added IPv6 ISIS support.

6.3.1.0 Introduced.

Usage

Information

You can assign a name to a routing process so a prefix list IS applied to only the routes derived from the

specified routing process.

Commands

● distribute-list in — filter the networks received in updates.

● redistribute — redistribute routes from one routing domain to another routing domain.

distribute-list redistributed-override

Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the network.

Syntax

distribute-list redistributed-override in

To return to the default, use the no distribute-list redistributed-override in command.

Defaults none

Command Modes

● ROUTER ISIS (for IPv4)

● CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.