Setup Guide

keyboard-interactive Press enter key to get prompt
LINE c banner-text(max length 255) c, where 'c' is a
delimiting character
DellEMC(conf)#no banner login ?
acknowledgement Disable positive acknowledgment required after
login prompt
keyboard-interactive Prompt will be displayed by default
If you configure the acknowledgement keyword, the system requires a positive acknowledgement from
the user while logging in to the system.
$ telnet 10.11.178.16
Trying 10.11.178.16...
Connected to 10.11.178.16.
Escape character is '^]'.
THIS IS A LOGIN BANNER. PRESS ‘Y’ TO ACKNOWLEDGE. ACKNOWLEDGE?
[y/n]: y
Login: admin
Password:
Related
Commands
● banner motd — sets a Message of the Day banner.
● banner exec — enables the display of a text string when you enter EXEC mode.
banner motd
Set a message of the day (MOTD) banner.
Syntax
banner motd c line c
To delete a Message of the Day banner, enter no banner motd.
Parameters
c Enter a delineator character to specify the limits of the text banner. The delineator
is a percent character (%).
line Enter a text string for your MOTD banner the message with your delineator. The
delineator is a percent character (%).
Defaults No banner is configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Control and Monitoring 87