Users Guide

Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced.
Usage
Information
This command applies to both IPv4 and IPv6 CAM Profiles, but is best used when verifying QoS
optimization for IPv6 ACLs.
QoS Optimization for IPv6 ACLs does not impact the CAM usage for applying a policy on a single (or
the first of several) interfaces. It is most useful when a policy is applied across multiple interfaces; it can
reduce the impact to CAM usage across subsequent interfaces.
The following describes the test cam-usage command shown in the following example.
Term Explanation
Stack-Unit
Lists the stack unit or units that are checked. Entering all shows the status for all
stacks.
Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are checked. Entering
all shows the status for stack-units and port-pipes in the chassis. The port set
value is from 0 to 0.
CAM Partition Shows the CAM profile of the CAM.
Available CAM Identifies the amount of CAM space remaining for that profile.
Estimated CAM
per Port
Estimates the amount of CAM space the listed policy will require.
Status Indicates whether or not the policy will be allowed in the CAM.
Example
DellEMC# test cam-usage service-policy input In stack-unit all
Stack-Unit|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port|Status
----------------------------------------------------------------------------
1 | 0 | IPv4Flow | 102 | 0| Allowed
1 | 0 | IPv4Flow | 102 | 0| Allowed
DellEMC#
!
DellEMC# test cam-usage service-policy input In stack-unit 1 port-set 0
Stack-Unit|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port|Status
-----------------------------------------------------------------------------
1 | 0 | IPv4Flow | 102 | 0| Allowed
DellEMC#
Example
Content Addressable Memory (CAM) 473