White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

221

222

223

224

225

226

227

228

229

230

Table Of Contents

show mac access-lists

Display all of the Layer 2 ACLs configured in the system, whether or not they are applied to an interface, and the count of

matches/mismatches against each ACL entry displayed.

Syntax

show mac access-lists [access-list-name] [interface interface] [in | out]

Parameters

access-list-name

Enter the name of a configured MAC ACL, up to 140 characters.

interface

Enter the keyword interface then the one of the following keywords and the

interface information:

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port/subport[/subport] information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

slot/port information.

● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

● For a port-channel interface, enter the keywords port-channel then the

port-channel ID.

in | out Identify whether ACL is applied on ingress or egress side.

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.5.1.0 Added support for 4-port 40G line cards on the E-Series.

8.4.1.0 Introduced.

show mac accounting access-list

Display MAC access list configurations and counters (if configured).