White Papers

6.6.6.2, via Te 1/16
C 4.4.4.0/24 Direct, Te 1/4 0/0 00:01:32
C 6.6.6.0/24 Direct, Te 1/16 0/0 00:01:25
DellEMC(conf)#do show ip route 1.1.1.0/24
Routing entry for 1.1.1.0/24
Known via "static", distance 1, metric 0
Last update 00:05:01 ago
Routing Descriptor Blocks:
* 4.4.4.2, via TenGigabitEthernet 1/4
* 6.6.6.2, via TenGigabitEthernet 1/16
DellEMC(conf)#
show ip route list
Display IP routes in an IP prefix list.
Syntax
show ip route [vrf vrf-name] list prefix-list
Parameters
prefix-list Enter the name of a configured prefix list.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to display IP routes in an
IP prefix list corresponding to that VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Example
DellEMC# show ip route list test
822 IPv4 Routing