Administrator Guide

● hmac-shal-96: Force ssh to use the hmac-sha1–96 HMAC algorithm.
● hmac-sha1: Force ssh to use the hmac-sha1 HMAC algorithm.
● hmac-md5–96: Force ssh to use the hmac-md5–96 HMAC algorithm.
● hmac-md5: Force ssh to use the hmac-md5 HMAC algorithm.
With the FIPS mode enabled:
● hmac-sha2-256: Force ssh to use the hmac-sha2-256 HMAC algorithm.
● hmac-shal-96: Force ssh to use the hmac-sha1–96 HMAC algorithm.
● hmac-sha1: Force ssh to use the hmac-sha1 HMAC algorithm.
● hmac-md5–96: Force ssh to use the hmac-md5–96 HMAC algorithm.
● hmac-md5: Force ssh to use the hmac-md5 HMAC algorithm.
-p port-number (OPTIONAL) Enter the keyword —p then the port number.
The range is 1 to 65535.
-v 2 (OPTIONAL) Enter the keyword —v then the SSH version 2.
The default: The version from the protocol negotiation.
NOTE: If the FIPS mode is enabled, this option does not display in the output.
Defaults See Parameters.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Removed the support for hmac-sha2-256-96 algorithm.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.5(0.1) Introduced on the Z9500.
9.1(0.0) Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Related
Commands
ip ssh server Configure an SSH server.
show ip ssh
client-pub-keys
Display the client-public keys.
Usage
Information
Dell EMC Networking OS supports both inbound and outbound SSH sessions using IPv4 or IPv6
addressing. Inbound SSH supports accessing the system through the management interface as well as
through a physical Layer 3 interface.
NOTE: Some of the parameters in this command require licensing to access. For more information,
contact your Dell EMC Networking representative.
Example
If FIPS mode is not enabled:
DellEMC# ssh 10.10.10.10 ?
-c Encryption cipher to use (for v2 clients only)
-l User name option
-m HMAC algorithm to use (for v2 clients only)
-p SSH server port option (default 22)
-v SSH protocol version
<cr>
DellEMC# ssh 10.10.10.10 -c ?
550 FIPS Cryptography