API Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1301

Table Of Contents

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.12(0.0) Introduced the seq option for the class-map on all the Dell EMC Networking OS

platforms.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Available on the C-Series and S-Series.

7.5.1.0 Added support for the DSCP Marking option.

7.4.1.0 Introduced on the E-Series.

Usage

Information

To access this command, enter the class-map command. After the class map is identified, you can

configure the match criteria.

Commands

● class-map — identifies the class map.

match mac vlan

Configure a match criterion for a class map based on VLAN ID.

Syntax

[seq sequence number] match mac vlan number

Parameters

seq

sequence

number

(OPTIONAL) Enter the keyword seq then the sequence number. The range is from

1 to 100. By default, the sequence number are assigned in multiples of five.