API Guide

Parameters
primary email-
address
Enter the keyword primary then the primary email address for the person.
alternate email-
address
Enter the keyword alternate then the alternate email address for the person.
Command Modes SUPPORTASSIST PERSON
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
The email addresses must have the standard form of <username>@<email system> to be considered
valid.
This command is optional for SupportAssist service configuration.
Related
Commands
● preferred-method — configure the preferred method for contacting the person.
phone
Configure phone numbers to reach the contact person.
Syntax
phone primary phone [alternate phone]
To remove a phone number, use the no phone command. To remove the primary and alternate phone
numbers, use the no phone primary and no phone alternate commands respectively.
Parameters
primary phone Enter the keyword primary then the primary phone number for the person.
alternate phone Enter the keyword alternate then the alternate phone number for the person.
Command Modes SUPPORTASSIST PERSON
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
The phone numbers may contain country codes, area codes and extensions, if necessary. Allowable
characters are 0 to 9, x, (, ), - and +.
This command is optional for SupportAssist service configuration.
SupportAssist 1635