API Guide

bgp (OPTIONAL) View information for all IPv6 BGP routes.
connected (OPTIONAL) View only the directly connected IPv6 routes.
isis (OPTIONAL) View information for all IPv6 IS-IS routes.
list (OPTIONAL) View the IPv6 prefix list.
ospf (OPTIONAL) View information for all IPv6 OSPF routes.
rip (OPTIONAL for E-Series only) View information for all IPv6 RIP routes.
static (OPTIONAL) View only routes configured by the ipv6 route command.
summary (OPTIONAL) View a brief list of the configured IPv6 routes.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Introduced on S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information
The following describes the show ipv6 route command shown in the following examples.
Field Description
(undefined) Identifies the type of route:
● L = Local
● C = connected
● S = static
● R = RIP
● B = BGP
● IN = internal BGP
● EX = external BGP
● LO = Locally Originated
● O = OSPF
●
IA = OSPF inter-area
● N1 = OSPF NSSA external type 1
IPv6 Basics 861