CLI Guide

shared-
threshold-
weight on the
queue
% of available shared buffer that can be consumed by the
queue
10 80%
11 88.89%
Example
DellEMC(conf-if-te-1/8/1)# Service-class buffer shared-threshold-weight
queue5 4 queue7 6
test cam-usage
Check the Input Policy Map configuration for the CAM usage.
S6000–ON
Syntax
test cam-usage service-policy input policy-map stack-unit {[number port-set
portpipe number] | [all]}
Parameters
policy-map Enter the policy map name.
stack-
unit number
(OPTIONAL) Enter the keyword stack-unit then the stack-unit slot number.
port-set portpipe
number
Enter the keywords port-set then the stack-unit port pipe number. The range is
from 0 or 1.
stack-unit all (OPTIONAL) Enter the keywords stack-unit all to indicate all stack-unit.
Defaults none
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage
Information
This feature allows you to determine if the CAM has enough space available before applying the
configuration on an interface.
Quality of Service (QoS) 1253