CLI Guide

redistribute
Redistribute information from other routing instances.
Syntax
redistribute {connected | static}
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
connected Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
static Enter the keyword static to specify that information from static routes is
redistributed.
Defaults Not configured.
Command Modes ROUTER RIP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information originate
command.
Related
Commands
● default-information originate — generates a default route for RIP traffic.
redistribute isis
Redistribute routing information from an IS-IS instance.
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-
value] [route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 |
level-2] [metric metric-value] [route-map map-name] command.
Routing Information Protocol (RIP) 1287