CLI Guide

Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Added support for the sha256-password option for S3100, S3048–ON, S4048–
ON, S4810, S4820T, S5000, S6000, S6000–ON, Z9100–ON, MXL, and Z9500.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T, S4810, MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added support for the secret option and the MD5 password encryption.
Extended the name from 25 to 63 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage
Information
To view the defined user names, use the show running-config user command. You can use the
dynamic-salt option only under the secret and the password options.
When you configure the password, the system alerts if your password does not match the following
criteria. The system accepts your password even if these conditions are not met. Dell EMC Networking
recommends selecting a strong password for enhanced security.
● A minimum of eight characters in length
● A minimum of one lower case letter (a to z)
● A minimum of one upper case letter (A to Z)
● A minimum of one numeric character (0 to 9)
● A minimum of one special character including a space (" !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~")
Related
Commands
● password — specifies a password for users on terminal lines.
● show running-config — views the current configuration.
RADIUS Commands
The following RADIUS commands are supported by Dell EMC Networking OS.
aaa radius auth-method
Configure the authentication method to use with RADIUS for user access.
Syntax
aaa radius auth-method {pap | mschapv2}
To undo the RADIUS authentication method configuration, use the no aaa radius auth-method
command.
1354 Security