CLI Guide

Version Description
9.14(2.3) Introduced on the S4048–ON, S4048T-ON, S6000, S6010-ON, S6100-ON, and
Z9100–ON.
Usage
Information
Use the disable-mac-learn command in the VXLAN-INSTANCE mode.
NOTE:
● This command is only applicable for static VXLAN and does not work for the other modes of
VXLAN (controller and nuage).
● The remote VTEP should already be configured.
● In case of static VXLAN VLT deployments, this configuration should be symmetric across VLT
nodes.
feature vxlan
Enable VXLAN configuration globally on the platform.
Syntax
feature vxlan
To disable the VXLAN, use the no feature vxlan command.
Defaults Disabled
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10)) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage
Information
You must configure feature VXLAN to configure VXLAN-instance.
Related
Commands
vxlan-instance — Enable VXLAN Instance configuration on the platform.
fail-mode
Configures failure-mode on the platform.
Syntax
fail-mode secure
To disable the fail-mode secure, use the no fail-mode securecommand.
Parameters
secure Enter the keyword secure to delete all its database and hardware flows/
resources, when the VTEP loses connectivity with the controller.
Defaults non secure
Command Modes VXLAN INSTANCE
Virtual Extensible LAN (VXLAN) 1653