CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

371

372

373

374

375

376

377

378

379

380

Table Of Contents

Command Modes CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.8.0 Introduced on the S4810.

Commands

● bgp add-path — allow the advertisement of multiple paths for the same address prefix without the

new paths implicitly replacing any previous ones.

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.

Syntax

neighbor {ip-address | peer-group-name} advertisement-interval seconds

To return to the default value, use the no neighbor {ip-address | peer-group-name}

advertisement-interval command.

Parameters

ip-address

(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.

peer-group-name

Enter the name of the peer group to set the advertisement interval for all routers in

the peer group.

seconds

Enter a number as the time interval, in seconds, between BGP advertisements. The

range is from 0 to 600 seconds. The default is 5 seconds for internal BGP peers

and 30 seconds for external BGP peers.

Defaults

● seconds = 5 seconds (internal peers)

● seconds = 30 seconds (external peers)

Command Modes ROUTER BGP