Deployment Guide

write
Copy the current configuration to either the startup-configuration file or the terminal.
Syntax
write [memory [compressed] | terminal]
Parameters
memory Enter the keyword memory to copy the current running configuration to the
startup configuration file. This command is similar to the copy running-config
startup-config command.
compressed Enter the keyword compressed to write the operating configuration to the
startup-config file in the compressed mode.
terminal Enter the keyword terminal to copy the current running configuration to the
terminal. This command is similar to the show running-config command.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
The write memory command saves the running-configuration to the file labeled startup-configuration.
When using a LOCAL CONFIG FILE other than the startup-config not named “startup-configuration” (for
example, you used a specific file during the boot config command), the running-config is not saved to
that file; use the copy command to save any running-configuration changes to that local file.
When you use the write memory command to copy the running configuration to the startup
configuration file with the startup configuration verification feature enabled, the system prompts you
to update the hash for the startup configuration using the verified boot hash command.
Control and Monitoring 155