Deployment Guide

Network Next Hop Metric LocPrf Weight Path
*> 55.0.0.0/24 172.16.0.2 0 200 400 500 600 i
*> 66.0.0.0/24 172.16.0.2 0 200 500 i
DellEMC#
show ip bgp flap-statistics
View flap statistics on BGP routes.
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 unicast]
flap-statistics [ip-address [mask]] [filter-list as-path-name] [regexp
regular-expression]
Parameters
vrf vrf-name (OPTIONAL) Enter the keywords vrf and then the name of the VRF to view flap
statistics on BGP routes corresponding to that VRF.
ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to
view information related only to ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view
information related only to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view
information related only to ipv6 unicast routes.
ip-address (OPTIONAL) Enter the IP address (in dotted decimal format) of the BGP network
to view information only on that network.
mask (OPTIONAL) Enter the network mask (in slash prefix (/x) format) of the BGP
network address.
filter-list as-
path-name
(OPTIONAL) Enter the keyword filter-list then the name of a configured
AS-PATH ACL. The range is 140 characters.
regexp regular-
expression
Enter a regular expression then use one or a combination of the following
characters to match. The range is 256 characters.
● . = (period) any single character (including a white space).
● * = (asterisk) the sequences in a pattern (zero or more sequences).
● + = (plus) the sequences in a pattern (one or more sequences).
● ? = (question mark) sequences in a pattern (either zero or one sequences).
NOTE: Enter an escape sequence (CTRL+v) prior to entering the ? regular
expression.
● [ ] = (brackets) a range of single-character patterns.
● ( ) = (parenthesis) groups a series of pattern elements to a single element.
● { } = (braces) minimum and the maximum match count.
● ^ = (caret) the beginning of the input string. If you use the caret at the
beginning of a sequence or range, it matches on everything BUT the characters
specified.
● $ = (dollar sign) the end of the output string.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
Border Gateway Protocol 425