Install Guide

Example In the following example, after 5 un-successful login attempts, the session (SSH/TELNET) goes into a
locked state for 5 minutes. If all the 10 sessions are locked out with 5 un-successful attempts in each
session, no users can login during the lockout-period.
DellEMC(conf)# password-attributes max-retry 5 lockout-period 5
Related
Commands
● password — specifies a password for users on terminal lines.
secure-cli enable
Enable the secured CLI mode.
Syntax
secure-cli enable
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced this command.
Usage
Information
The secured CLI mode prevents the users from enhancing the permissions or promoting the privilege
levels. After entering the command, save the running-configuration.
Once you save the running-configuration, the secured CLI mode is enabled. If you do not want to enter
the secured mode, do not save the running-configuration.
Once saved, to disable the secured CLI mode, you need to manually edit the startup-configuration file and
reboot the system.
service password-encryption
Encrypt all passwords configured in Dell EMC Networking OS.
Syntax
service password-encryption
To store new passwords as clear text, use the no service password-encryption command.
Defaults Enabled.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
Security 1363