Install Guide

vlt-peer-mac transmit
Enables the device to transmit the peer MAC address along with its own MAC address in LLDP TLV packets to the remote VLT
domain.
Syntax
[no] vlt-peer-mac transmit
Command Modes VLT DOMAIN PROXY GW LLDP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
This command enables the device to transmit its VLT peer MAC address along with its own MAC address
to the remote VLT domain. By default, a node sends only its own MAC address to the remote VLT
domain.
This configuration is applicable only for an LLDP proxy gateway. A typical use example is a square VLT
topology with single link connecting to the remote peers.
Example
DellEMC(conf-vlt-domain-proxy-gw-lldp)# vlt-peer-mac transmit
show vlt-proxy-gateway
Displays the VLT proxy gateway configuration.
Syntax
show vlt-proxy-gateway [info] {lldp | static}
Parameters
lldp Enter the keyword lldp to display details about the LLDP VLT proxy gateway
configuration.
static Enter the keyword static to display details about the static VLT proxy gateway
configuration.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
1636 VLT Proxy Gateway