Install Guide

Related
Commands
● show ip dhcp snooping — display the contents of the DHCP binding table.
IPv6 DHCP Snooping Binding
Create a static DHCP snooping binding entry in the snooping database.
Syntax
[no] ipv6 dhcp snooping binding mac address vlan-id vlan-id ipv6 ipv6-
address interface interface-type | interface-number lease value
To delete the DHCP snooping binding entry from DHCP snooping database, use the [no] ipv6 dhcp
snooping binding mac address vlan-id vlan-id ipv6 ipv6-address interface
interface-type | interface-number lease valuecommand.
Parameters
mac address Enter the keyword mac then the MAC address of the host to which the server is
leasing the IPv6 address.
vlan-id Enter the keywords vlan-id then the VLAN to which the host belongs. The range
is from 2 to 4094.
ipv6 ipv6-
address
Enter the keyword ipv6 then the IPv6 address that is leased to the client.
interface type Enter the keyword interface then the type of interface to which the host is
connected:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the stack/slot/port/subport information.
● For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE
then the stack/slot/port/subport information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
stack/slot/port[/subport] information.
● For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the
stack/slot/port/subport information.
● For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then
the stack/slot/port information.
interface number Enter the number of the interface.
lease value Enter the keyword lease then the amount of time the IPv6 address are leased.
The range is from 1 to 4294967295.
Defaults None
Command Modes
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.
Dynamic Host Configuration Protocol (DHCP) 555