Setup Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1381

Table Of Contents

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.4 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.4.1.0 Introduced on the C-Series and S-Series.

Usage

Information

To disable MAC authentication bypass on a port, enter the no dot1x mac-auth-bypass command.

dot1x max-eap-req

Configure the maximum number of times an extensive authentication protocol (EAP) request is transmitted before the session

times out.

Syntax

dot1x max-eap-req number

To return to the default, use the no dot1x max-eap-req command.

Parameters

number

Enter the number of times an EAP request is transmitted before a session time-out.

The range is from 1 to 10. The default is 2.

Defaults 2

Command Modes INTERFACE