Setup Guide

Usage
Information
Use this command to associate a specific VNID to a remote VTEP. Provide a valid profile name while
associating to the remote VTEP.
NOTE: The remote VTEP IP Address cannot be any of the local IP Addresses configured in the
switch.
vnid
Associate a range of VNID numbers to a specific VNI profile.
Syntax
vnid VNID-Range
To remove the association, use the no vnid command.
Parameters
VNID-Range Enter the range of VNIDs that need to be members of the specific VNI profile. The
range is from 1 to 16777215.
Defaults None.
Command Modes VNI-PROFILE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Usage
Information
Use this command to associate the specified range of VNIDs to a VNI profile.
vni-profile
Create a VNI profile to associate with remote VTEP configuration.
Syntax
vni—profile profile name
To delete the VNI profile, use the no vni-profile command.
Parameters
profile name Enter a valid and unique profile name. The profile name can have a maximum of 32
characters.
Defaults None
Command Modes VXLAN-INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Usage
Information
Use this command to create a VNI profile with a unique profile name to associate with remote VTEP. You
can create a maximum of 1024 VNI profiles and remote VTEP IPs.
You can use this command only when you configure static VXLAN.
1654 Virtual Extensible LAN (VXLAN)