Users Guide

show crypto ipsec sa ipv6 Command Fields
Field Description
Interface IPv6 interface
Link local
address
IPv6 address of interface
IPSecv6 policy
name
Name of the IPsec security policy applied to the interface.
inbound/
outbound ah
Authentication policy applied to inbound or outbound traffic.
inbound/
outbound esp
Encryption policy applied to inbound or outbound traffic.
spi Security policy index number used to identify the policy.
transform Security algorithm that is used to provide authentication, integrity, and confidentiality.
in use settings Transform that the SA uses (only transport mode is supported).
replay detection
support
Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
STATUS ACTIVE: The authentication or encryption policy is enabled on the interface.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs) in detail.
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] database [database-summary |
grace-lsa | external | inter-area-prefix | inter-area-router | intra-area-
prefix | link | network | router | nssa-external]
Parameters
process-number Enter the OSPF process number.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display
neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors corresponding to the
default VRF are displayed.
database-
summary
(OPTIONAL) Enter the keyword database-summary to view a summary of
database LSA information.
external (OPTIONAL): Enter the keyword external to display the external link states.
grace-lsa
(OPTIONAL): Enter the keyword grace-lsa to display the Type-11 Grace LSAs
sent and received on an OSPFv3 router.
inter-area-prefix (OPTIONAL): Enter the keyword inter-area-prefix to display the inter area
prefix link states.
inter-area-router (OPTIONAL): Enter the keyword inter-area-router to display the inter area
router link states.
intra-area-prefix (OPTIONAL): Enter the keyword intra-area-prefix to display the intra area
prefix link states.
link (OPTIONAL): Enter the keyword link to display the link states.
network (OPTIONAL): Enter the keyword network to display the network link states.
nssa-external (OPTIONAL): Enter the keyword nssa-external to display the nssa link state
information.
1156 Open Shortest Path First (OSPFv2 and OSPFv3)