Users Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1551

Table Of Contents

Version Description

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

Commands

● forward-delay — changes the wait time before STP transitions to the Forwarding state.

● max-age — changes the wait time before STP refreshes protocol configuration information.

max-age

To maintain configuration information before refreshing that information, set the time interval for the spanning tree bridge.

Syntax

max-age seconds

To return to the default values, use the no max-age command.

Parameters

seconds

Enter a number of seconds the Dell EMC Networking OS waits before refreshing

configuration information. The range is from 6 to 40. The default is 20 seconds.

Defaults 20 seconds

Command Modes SPANNING TREE

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.12(1.0) Introduced on the S5048F–ON.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.