API Guide

Table Of Contents

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2.(1.0) Introduced on the Z9500.

8.4.2.1 The range of valid VRID values on the E-Series when VRF microcode is loaded in CAM

changed from 1 to 15.

8.4.1.0 Introduced on the E-Series ExaScale, C-Series, and S-Series.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.3.2.0 Introduced on the E-Series TeraScale.

Usage Information

The VRRP group only becomes active and sends VRRP packets when a link-local virtual IP address is configured.

When you delete the virtual address, the VRRP group stops sending VRRP packets.

NOTE: Configure the same VRID on neighboring routers (Dell Networking or non-Dell Networking)

in the same VRRP group in order for all routers to interoperate.

Commands

virtual-address — assigns up to 12 virtual IP addresses per VRRP group.

1708 Virtual Router Redundancy Protocol (VRRP)