API Guide

-------- -------- -------- ------- ----- ------ -----------
TCP (BGP) any/179 179/any _ Q13 RP 2500
UDP (DHCP) 67/68 68/67 _ Q6 CP 1200
UDP (DHCP-R) 67 67 _ Q6 CP 1200
TCP (FTP) any 21 _ Q3 CP 400
ICMP any any _ Q5 CP 300
IGMP any any _ Q12 RP 300
TCP (MSDP) any/639 639/any _ Q12 RP 100
UDP (NTP) any 123 _ Q3 CP 200
OSPF any any _ Q13 RP 2500
PIM any any _ Q12 RP 300
UDP (RIP) any 520 _ Q13 RP 200
TCP (SSH) any 22 _ Q3 CP 400
TCP (TELNET) any 23 _ Q3 CP 400
VRRP any any _ Q13 RP 400
show ipv6 protocol-queue-mapping
Display the CPU queue mapping for IPv6 protocols.
C9000 Series
Syntax
show ipv6 protocol-queue-mapping
Defaults Not configured.
Command Modes EXEC Privilege
Usage Information
The show output displays information CPU traffic flows for supported IPv6 protocols, including the ingress queue
at which the traffic is queued and the CPU to which protocol traffic is sent with the applied rate limits (configured
or default) in kilobits per second (kbps). The egress port queues on CPUs are abbreviated as: RP (Route
Processor), CP (Control Processor), and LC (line card).
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Example
Dell#show ipv6 protocol-queue-mapping
Protocol Src-Port Dst-Port TcpFlag Queue EgPort Rate (kbps)
-------- -------- -------- ------- ----- ------ -----------
TCP (BGP) any/179 179/any _ Q15 RP 2500
ICMPV6 NA any any _ Q3/Q11 CP/RP 600
ICMPV6 RA any any _ Q3/Q11 CP/RP 600
ICMPV6 NS any any _ Q2/Q10 CP/RP 600
ICMPV6 RS any any _ Q2/Q10 CP/RP 600
ICMPV6 any any _ Q5 CP 300
VRRPV6 any any _ Q15 RP 400
OSPFV3 any any _ Q15 RP 2500
500 Control Plane Policing (CoPP)