API Guide

Available free memory: 1,705,611,264 bytes
LEVEL 0 DIAGNOSTIC
Starting test: bcm56854AccessTest ......
+ Access Test for unit 0 : PASSED
bcm56854AccessTest .......................................... PASS
biosVerGetTest .............................................. PASS
boardRevisionTest ........................................... PASS
cpldAccessTest .............................................. PASS
Starting test: CpuGbeLinkStatusTest ......
+ GbE1 Link Status DOWN
+ GbE2 Link Status UP
CpuGbeLinkStatusTest ........................................ FAIL
cpuRevisionTest ............................................. PASS
cpuSdramPresenceTest ........................................ PASS
cpuSdramSizeTest ............................................ PASS
eepromTest .................................................. PASS
extenderCpldAccessTest ...................................... PASS
Starting test: hgLinkStatusTest ......
ERROR: hg port 27 is DOWN
ERROR: hg port 28 is DOWN
ERROR: hg port 29 is DOWN
ERROR: hg port 30 is DOWN
ERROR: hg port 31 is DOWN
ERROR: hg port 32 is DOWN
hgLinkStatusTest ............................................ FAIL
Starting test: i2cTest ......
ERROR: ioctl: "pol3.3V" op(1)=READ WITH STOP bus=4 address=0x57 offset=0x2
length=1
ERROR: ioctl: "SFP2" op(1)=READ WITH STOP bus=11 address=0x50 offset=0
length=1
ERROR: ioctl: "SFP3" op(1)=READ WITH STOP bus=12 address=0x50 offset=0
length=1
ERROR: ioctl: "SFP5" op(1)=READ WITH STOP bus=14 address=0x50 offset=0
length=1
i2cTest ..................................................... FAIL
Starting test: opticEepromTest ......
ERROR: optic:9 is not present
ERROR: optic:13 is not present
ERROR: optic:21 is not present
opticEepromTest ............................................. FAIL
opticPhyTest ................................................ PASS
Starting test: opticPresenceTest ......
ERROR: optic:9 is not present
ERROR: optic:13 is not present
ERROR: optic:21 is not present
opticPresenceTest ........................................... FAIL
Starting test: pcieScanTest ......
17 PCI devices installed out of 17
pcieScanTest ................................................ PASS
rtcTest ..................................................... PASS
sataSsdTest ................................................. PASS
Starting test: showTemperature ......
+Board First Thermal Monitor Sensor[0] is 42.0 C
+Board First Thermal Monitor Sensor[1] is 33.0 C
+Board First Thermal Monitor Sensor[2] is 34.0 C
+Board First Thermal Monitor Sensor[3] is 255.0 C
CPU Temp 25 c
DDR Temperature 33 c
showTemperature ............................................. PASS
slotInfoTest ................................................ PASS
Starting test: spiFlashAccessTest ......temperature monitor 0: current=
52.0, peak= 54.1
temperature monitor 1: current= 52.5, peak= 54.7
temperature monitor 2: current= 53.1, peak= 56.3
temperature monitor 3: current= 52.5, peak= 54.1
temperature monitor 4: current= 54.1, peak= 56.8
temperature monitor 5: current= 54.7, peak= 56.8
Debugging and Diagnostics
557