API Guide

Parameters
interface slot/
port-range
Enter one of the following interface types and port information to specify a single port or
a range of ports. To specify a port range, you can enter a hyphenated range and/or
individual port numbers separated with commas; for example, default interface
tengigabitethernet 1/0-4,7,9-11. To enter any random number of ports, you
can enter a comma-separated string of port numbers, for example
default
interface tengigabitethernet 1/0,1,9,11
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010, FNXML, MXL, S4810, S4820T, S3048-ON, S4048-ON, S5000,
S6000, S6000-ON, and Z9500.
Usage Information
Use the default interface command to set a 10-Gigabit Ethernet or 40-Gigabit Ethernet interface to its
factory-default state. By default, a physical interface is disabled (shutdown) with no assigned IP address or
switchport (
no ip address).
This command removes all software settings and all L3, VLAN, VXLAN, and port-channel configurations on a
physical interface.
Example
Dell# show running-config interface tengigabitethernet 0/30
!
interface TenGigabitEthernet 0/30
no ip address
switchport
switchport mode private-vlan host
rate-interval 8
mac learning-limit 10 no-station-move
shutdown
Dell#show running-config interface vlan 33
!
interface Vlan 33
private-vlan mode isolated
no ip address
tagged TenGigabitEthernet 0/30
shutdown
Dell(conf)# default interface tengigabitethernet 0/30
Dell# show running-config interface tengigabitethernet 0/30
!
interface TenGigabitEthernet 0/30
no ip address
shutdown
Dell#show running-config interface vlan 33
!
interface Vlan 33
private-vlan mode isolated
no ip address
shutdown
Related
Commands
show running-config— displays the current configuration.
688 Interfaces