CLI Guide

Table Of Contents
Related
Commands
reload reboot the Dell EMC Networking OS.
show system display the status of all stack members or a specific member.
stack-unit stack-group
Configure the stacking unit and stacking group by specifying an ID when adding units to a stack to ensure the unit is assigned to
the correct group.
Syntax
stack-unit unit-id stack-group stack-group-id
To remove the current stack group configuration, use the no stack-unit unit-id stack-group
stack-id command.
Parameters
unit-id
Enter the stack unit ID.
stack-group-id
Enter the stack group ID.
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.1 Introduced on the S4810.
8.3.12.0 Reset command mode from EXEC to CONFIGURATION.
Usage
Information
The following message displays to confirm the command.
Setting ports Fo 1/60 as stack group will make their interface configs
obsolete after a reload.[confirm yes/no]: If y is entered, all non-
default configurations on any member ports of the current stack group
will be removed when the unit is rebooted.
NOTE: Any scripts used to streamline the stacking configuration process must be updated to reflect
the Command Mode change from EXEC Privilege to CONFIGURATION to allow the scripts to work
correctly.
upgrade system stack-unit
Copy the boot image or Dell EMC Networking OS from the management unit to one or more stack members.
Syntax
upgrade {boot | system} stack-unit {all | stack-unit-number | A | B}
Parameters
boot Enter the keyword boot to copy the boot image from the management unit to the
designated stack members.
system Enter the keyword system to copy the Dell EMC Networking OS image from the
management unit to the designated stack members.
1516 Stacking