CLI Guide

shutdown all
Disables all the BGP neighbors.
Syntax
shutdown all
Use the no shutdown all command to enable all the configured BGP neighbors.
Command Modes ROUTER BGP
Command
History
Version Description
9.11.0.0 Introduced on the S-Series, Z-Series, MXL, and IOM.
Usage
Information
You can use this command to disable all the configured BGP neighbors.
This command is global for all VRFs.
shutdown address-family-ipv4–multicast
Disables all the BGP neighbors corresponding to the multicast IPv4 address families.
Syntax
shutdown address-family-ipv4–unicast
Use the no shutdown address-family-ipv4–unicast command to enable all the configured
BGP neighbors corresponding to the multicast IPv4 address families.
Command Modes
ROUTER BGP
CONFIGURATION
Command
History
Version Description
9.11.0.0 Introduced on the S-Series, Z-Series, MXL, and IOM.
Usage
Information
You can use this command to disable all the configured BGP neighbors corresponding to the multicast
IPv4 address families.
This command is global for all VRFs.
shutdown address-family-ipv4–unicast
Disables all the BGP neighbors corresponding to the unicast IPv4 address families.
Syntax
shutdown address-family-ipv4–unicast
Use the no shutdown address-family-ipv4–unicast command to enable all the configured
BGP neighbors corresponding to the unicast IPv4 address families.
Command Modes
ROUTER BGP
CONFIGURATION
Command
History
Version Description
9.11.0.0 Introduced on the S-Series, Z-Series, MXL, and IOM.
Usage
Information
You can use this command to disable all the configured BGP neighbors corresponding to the unicast IPv4
address families.
This command is global for all VRFs.
Border Gateway Protocol 397