Users Guide

Parameters
VNID-Range Enter the range of VNIDs that need to be members of the specific VNI profile. The
range is from 1 to 16777215.
Defaults None.
Command Modes VNI-PROFILE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Usage
Information
Use this command to associate the specified range of VNIDs to a VNI profile.
vni-profile
Create a VNI profile to associate with remote VTEP configuration.
Syntax
vni—profile profile name
To delete the VNI profile, use the no vni-profile command.
Parameters
profile name Enter a valid and unique profile name. The profile name can have a maximum of 32
characters.
Defaults None
Command Modes VXLAN-INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Usage
Information
Use this command to create a VNI profile with a unique profile name to associate with remote VTEP. You
can create a maximum of 1024 VNI profiles and remote VTEP IPs.
You can use this command only when you configure static VXLAN.
vxlan-instance
Enable VXLAN Instance configuration on the platform.
Syntax
vxlan-instance instance ID [nsx | nuage | static]
To delete vxlan-instance from the system, use no vxlan-instance instance ID command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1.
nsx Enter the keyword nsx to connect to an NSX controller.
NOTE: When no keyword is specified, the nsx option is applied.
nuage Enter the keyword nuage to connect to a Nuage controller.
static Enter the keyword static to configure static VXLANs.
Virtual Extensible LAN (VXLAN) 1757