Users Guide

ethernet
for the current Ethernet CFM configuration
fefd
for the current FEFD configuration
ftp
for the current FTP configuration
frrp
for the current FRRP configuration
fvrp
for the current FVRP configuration
gvrp
for the current GVRP configuration
host
for the current host configuration
hardware-
monitor
for hardware-monitor action-on-error settings
hypervisor
for the current hypervisor configuration
igmp
for the current IGMP configuration
interface
for the current interface configuration
interface
port-channel
for the current port-channel interface configuration.
interface
tunnel
for all configured tunnels. For a specific tunnel, enter the
tunnel ID. The range is from 1 to 16383.
ip
for the current IP configuration
isis
for the current ISIS configuration
line
for the current line configuration
lldp
for the current LLDP configuration
load-balance
for the current port-channel load-balance configuration
logging
for the current logging configuration
mac
for the current MAC ACL configuration
mac-address-
table
for the current MAC configuration
management-
eis
for the current management EIS configuration
management-
route
for the current Management port forwarding configuration
mld
for the current MLD configuration
monitor
for the current Monitor configuration
mroute
for the current Mroutes configuration
msdp
for the current MSDP configuration
ntp
for the current NTP configuration
ospf
for the current OSPF configuration
pim
for the current PIM configuration
policy-map-
input
for the current input policy map configuration
policy-map-
output
for the current output policy map configuration
po-failover-
group
for the current port-channel failover-group configuration
prefix-list
for the current prefix-list configuration
privilege
for the current privilege configuration
78 File Management