White Papers

Version Description
6.2.1.1 Introduced
Usage
Information
The connect-source option is used to supply a source IP address for the TCP connection. When
an interface is specified using the connect-source option, the primary configured address on the
interface is used.
If the total number of SA messages received from the peer is already larger than the limit when this
command is applied, those SA messages continue to be accepted. To enforce the limit in such situation,
use the clear ip msdp peer command to reset the peer.
Related
Commands
● ip msdp sa-limit — configure the MSDP SA Limit.
● clear ip msdp peer — clear the MSDP peer.
● show ip msdp — display the MSDP information.
ip msdp redistribute
Filter local PIM SA entries in the SA cache. SAs which the ACL denies time out and are not refreshed. Until they time out, they
continue to reside in the MSDP SA cache.
S4810
Syntax
ip msdp redistribute [list acl-name]
Parameters
list acl-name Enter the name of an extended ACL that contains permitted SAs. If you do not use
this option, all local entries are blocked.
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced
Usage
Information
Modifications to the ACL do not have an immediate effect on the sa-cache.
Multicast Source Discovery Protocol (MSDP) 1017